KGL Operating Manual – VS 3010 BS
2018-07-02
/
10 178
Voltage symbol – warns about hazardous electrical voltage
This work safety symbol warns about hazards from dangerous electrical voltage with possible
consequences of serious injuries and death.
ESD symbol - Warning about electrostatic sensitive components and control components
This symbol indicates electrostatic sensitive components and control components; for details see
chapter
Electrostatic sensitive components and control components (ESD), page 13
Note symbol
The note symbol highlights usage tips and other useful information contained in this operating and
service manual.
Battery disposal symbol
Never dispose of this product with other domestic waste.
Please inform yourself about the local regulations for the separated disposal of electrical and electronic products.
The correct disposal of your old equipment protects the environment and people against possible negative consequences. Further
information can be found in the chapter "Decommissioning and Disposal".
1.4 Safety Information
The safety regulations, instructions and information described in this chapter must be strictly
observed and complied with. During repairs on the entire E*LDS system, the accident prevention
regulations and general safety regulations must be strictly complied with. Important information
(safety instructions and hazard warnings) is indicated by appropriate symbols (see chapter
). Follow these instructions in order to prevent accidents and danger to life
and limb, as well as damage to the E*LDS system.
Warning about dangerous electrical voltage! Danger of electric shock! Beware of external voltage at
the digital inputs and outputs! All device connections/male connectors must only be plugged in,
unplugged and/or wired when
.
no voltage is present
This operating manual is part of the equipment. It
be kept in the vicinity of the controller as well as
must
for future use so that it can be consulted when required. The operating manual must be available for the
operating and maintenance personnel
for the avoidance of operating errors, see chapter
at any time
Explanation of 'safety instructions and hazard warnings', page 8
For safety reasons, the equipment must not be used for any applications other than described in the
operating manual and only for the intended use, see chapter
Warning Signs and Symbols Used, page
Before using the device, check whether it is suitable for your application with regard to its limit values.
Before connecting the device, it must be checked whether the power supply is suitable for the device.
