ECKELMANN UA 400, Operating Instruction

Page: 82 / 401

Firmware V3.15 21.04.2021 82/401
S1
(10 position) S2
(1 position) Configured
CAN bus address Function
0 0 00 CAN bus interface inactive (disabled)
0 1..9 01..09 Case controller: CAN bus address
assigned
1..9 0..9 10..99
Example:
S1
= 3 = 3 x 10 = 30 and
S2 = 4 = 4 x 1 = 4
→ CAN bus address = S1 + S2 = 30 + 4 = 34
The case controller does not accept the settings on the decade switches S1 and S2 until after the
controller has been briefly disconnected from the power supply! In the case of case controllers that are
installed in a switch cabinet, the CAN bus address has been set by the manufacturer. However, it can
be subsequently adjusted.
