ECKELMANN UA 400, Operating Instruction

Page: 10 / 401

Firmware V3.15 21.04.2021 10/401
•
•
•
1.
2.
3.
4.
1.
2.
ELECTRIC SHOCK
Risk of fatal electric shock!
This symbol warns of danger from dangerous voltage with possible consequences such as severe injury and death. If this
symbol is seen, the user must refer to the operating manual in order to understand the type of potential HAZARD and the required
actions for avoiding the HAZARD . Carefully observe all health and safety instructions and use particular caution in these
situations.
Failure to observe the WARNING symbol will cause injury (in the worst case, severe injury or death) and/or damage to
property!
ESD - Electrostatic-sensitive components and control components
DISPOSAL
Potential negative impact on people and the environment due to non-environmentally friendly disposal.
The strike-through dustbin symbol indicates the duty to dispose of items properly. Do not dispose of this product with other
domestic waste. Please inform yourself about the local regulations for the separate disposal of electrical and electronic products.
The correct disposal of your old equipment protects people and the environment from possible negative impact.
Failure to observe the DISPOSAL symbol will cause damage to people and the environment!
1.2 Explanation of text formatting
Safety instructions or hazard warnings are composed of four elements:
The symbol with text (e.g. for DANGER),
a concise description of the hazard and
a description of the possible consequences.
Where applicable, a catalogue with measures for avoiding the hazard.
For example:
A general instruction consists of two elements:
The symbol with text (including NOTICE, if applicable) and
the text of the instruction:
For example:
Risk of destruction of the control component / controller!
Electronic components and control components (e.g. circuit boards) are sensitive to electrostatic charges. Circuit boards may only
be replaced when the
power supply is disconnected . Always hold circuit boards by the edges. The guidelines for the handling of
electrostatic-sensitive components and control components must be observed at all times.
Failure to observe the ESD symbol will cause damage to property!
DANGER
Warning of dangerous electrical voltage! Risk of fatal electric shock!
Beware of external voltage at the digital inputs and outputs! Connections/plug connectors of the device
may only be plugged in, removed and/or wired when
no voltage is present .

NOTICE
The current operating manual is available online from the E°EDP (Eckelmann ° Electronic
Documentation Platform) at
www.eckelmann.de/elds .
