ECKELMANN UA 400, Operating Instruction

Page: 330 / 401

Firmware V3.15 21.04.2021 330/401
•
•
Menu 2-2-1 Zone 1
DEFROST 1 POS: XXXXX Entry Default
Def. End. Tmp. XX °C Defrost termination temperature setpoint --, 0..30 5 °C
Wait Time xx m Waiting time setpoint between cooling and
defrosting 0 .. 15 0 m
Drip Time x m Waiting time (drain time) setpoint between
defrosting and cooling 0 .. 15 0 m
2.Defrst Level xx °C Setpoint 2nd defrost stage --, -20..30 – °C
M/S Degiv.Fct. XXX Configuration of the defrost via CAN bus function.
For details see chapter
Master-Slave-Modus -
Abtau-Synchronisation über CAN-Bus .
OFF, MASTR, SLAVE OFF
M/S CAN Adr. XXX Selection of the controller (1..99) participating in
the defrost via CAN bus which is the master.
"--", if this controller is itself master(Parameter
M/
S Degiv.Fct. . = MASTR)
---, 1..99 –
DS-Function XXX Configuration of the defrost sequence function
(DS).For details see chapter
Folgeabtauung (FA)
über CAN-Bus .
OFF, MASTR, SLAVE OFF
DS-Group XXX Selection of which group a defrost sequence of
this controller (1..99) belongs to. ---, 1..99 –
DS-Master XXX Selection of which controller (1..99) participating
in the defrost sequence is the master.
"--", if this controller is itself the master (Parameter
DS-Function = MASTR)
---, 1..99 –
DS-Wait time XXXm Wait time for the defrost sequence 0..127 1 min
Menu 2-2-2 Zone 2
DEFROST 2 POS: XXXXX Entry Default
Def. End. Tmp. XX °C Defrost termination temperature setpoint --, 0..30 5 °C
Wait Time xx m Waiting time setpoint between cooling and
defrosting 0 .. 15 0 m
Drip Time x m Waiting time (drain time) setpoint between
defrosting and cooling 0 .. 15 0 m