72
11. Appendix 1 – Process data
Dual port ethernet option board installation manual
MN032004EN October 2017 www.eaton.com
11. Appendix 1 – Process data
Process data IN (master to slave)
The use of Process Data In variables depends on the used
application. The configuration of the data is free.
Process data OUT (slave to master)
The use of Process Data Out variables depends on the used
application. The Fieldbus Master can read the AC drive’s
actual values using process data variables. The control
applications use the process data as follows:
Table 156. Process data OUT variables
ID
Data
Value
Unit
Scale
2104
Process data OUT 1
Output Frequency
Hz
0,01 Hz
2105
Process data OUT 2
Motor Speed
rpm
1 rpm
2106
Process data OUT 3
Motor Current
A
0,1 A
2107
Process data OUT 4
Motor Torque
%
0,10 %
2108
Process data OUT 5
Motor Power
%
0,10 %
2109
Process data OUT 6
Motor Voltage
V
0,1 V
2110
Process data OUT 7
DC link voltage
V
1 V
2111
Process data OUT 8
Active Fault Code
–
–