Zero 88 FLX Lighting Console
–
User Manual
Page
39
of
64
left hand side of the screen. Each item in this list has a
section of the chapter below. To exit Setup, press the
Setup key again.
Patch Overview
When you first enter Setup, you’ll be in the “Patch
Overview” screen, which displays all the fixtures currently
patched on your console
(to add additional fixtures, see
” on
Views
The Patch Overview window can display the patch data in
three different views on the monitor (Outputs, Fixtures and
Channels). The default view is the Outputs view, but this
can be changed by pressing
Outputs
,
Fixtures
or
Channels
along the top of the Patch Overview screen.
Outputs view
This is the default patch view and displays the DMX
start address for each fixture for each DMX universe.
Two universes are displayed vertically with each fixture
listed according to its outputs. Additional Universes can
be viewed by selecting them at the top of the window.
Fixtures view
This patch view lists all the fixtures in the schedule
together with their alignment data and DMX patch
address(es). The fixtures are listed in group order.
Alignment data is only displayed if it has been changed
from the defaults. Patch addresses are displayed in the
format universe/address.
Channels view
This patch view shows the fixture type, fixture number
and parameter (eg Gobo1<>) patched to each DMX
address in each of the DMX universes.
Patch Overview screen in “Outputs” view.
Patch Overview screen in “
Fixtures
” view.
Patch Overview screen in “Outputs” view.