Eagle ICA-D212-725, Instructions Manual

Page: 79 / 729

ICA-D212-725 (11)
Page 4 of 19
CHAPTER 11 – PLACARDS AND MARKINGS (11-00-00)

COPYRIGHT

2007 BY DART AEROSPACE LTD.

THIS DOCUMENT IS PRIVATE AND CONFIDENTIAL AND IS SUPPLIED ON THE EXPRESS CONDITION THAT IT IS NOT TO BE USED FOR ANY PURPOSE OR COPIED OR COMMUNICATED TO ANY OTHER
PERSON WITHOUT WRITTEN PERMISSION FROM DART AEROSPACE LTD.
Revision:
6
Date: 13.08.26
with your finger or a squeegee to remove the air.
11.2.3 Edge seal or fully coat the decal with the
applicable coating, as follows:
11.2.3.1
Apply masking tape (C426) 1/8
inch (3 mm) away from the edge and all around
the decal.
NOTE
A clear polyurethane enamel (C-233) may be used
to seal decals applied to all types of exterior
finishes.
11.2.3.2
For the sealing of exterior decals,
apply the same material used for the exterior
painting. For example, if the exterior paint is
polyurethane enamel (C-233), then use a clear
polyurethane enamel (C2-33).
11.2.3.3
For the sealing of interior decals,
apply a clear decal sealer. (C-349).
11.2.3.4
Remove the masking tape (C-426)
from around the decal when the coating is dry.