Eagle ICA-D212-725, Instructions Manual

Page: 112 / 729

ICA-D212-725 (12)
Page 17 of 24
CHAPTER 12 – SERVICING (12-00-00)

COPYRIGHT

2007 BY DART AEROSPACE LTD.

THIS DOCUMENT IS PRIVATE AND CONFIDENTIAL AND IS SUPPLIED ON THE EXPRESS CONDITION THAT IT IS NOT TO BE USED FOR ANY PURPOSE OR COPIED OR COMMUNICATED TO ANY
OTHER PERSON WITHOUT WRITTEN PERMISSION FROM DART AEROSPACE LTD.
Revision:
6
Date: 13.08.26
040-755-005 lubricant goes into service, the re-
lubrication interval is dictated by the calendar and
service-time schedule whether the component is
installed on a helicopter or is subsequently
removed and returned to stock as a spare on the
shelf.
12.22.4 Lubricant in original tubes and
components containing 204-040-755-005 lubricant
should be stored at moderate ambient
temperatures, preferably less than 80°F (26.7°C).
Elevated storage temperatures promote oil
separation from the lubricant.
12.22.5
Ensure grease is thoroughly mixed
prior to use.
12.23 FLEXIBLE COUPLING LUBRICATION
LOG
MATERIALS REQUIRED
Refer to BHT-ALL-SPM for specification and
source.
A flex coupling lubrication log similar to one shown
on table 12-2 shall be maintained any time a
component using lubricant (tube pack) (C-015) is
installed on the helicopter. This log shall list date
lubricant was applied in component. This lubricant
carries an operational hour and a calendar
requirement specified in this chapter. Lubricant
shall be replaced at requirement occurring first
(hours/ months).
NUMBER NOMENCLATURE
C-015 Lubricant
204-040-755-005
(Tube pack)