Eagle ICA-D212-725, Instructions Manual

Page: 294 / 729

ICA-D212-725 (52
)
Page 43 of 54
CHAPTER 52 – DOORS AND WINDOWS (52-00-00)

COPYRIGHT

2007 BY DART AEROSPACE LTD.

THIS DOCUMENT IS PRIVATE AND CONFIDENTIAL AND IS SUPPLIED ON THE EXPRESS CONDITION THAT IT IS NOT TO BE USED FOR ANY PURPOSE OR COPIED OR COMMUNICATED TO
ANY OTHER PERSON WITHOUT WRITTEN PERMISSION FROM DART AEROSPACE LTD.
Revision: 4
Date: 11.06.01
52.7.1.4.15 Apply a small even bead of sealant
(C-328) to window frame.
52.7.1.4.16 Position windshield, align holes and
install shims (if required), screws, washers and
nuts.
52.7.1.4.17 Increase torque slowly and evenly
on all screws or nuts to a maximum of 23 in-lbs
(0.16 Nm). Verify torque before sealant dries.
52.7.1.4.18 Remove
excess sealant (C-328)
from around windshield with aliphatic naphtha
(C-305). Touch up paint if bare metal is evident.
52.7.1.4.19 Install
windshield wiper
assemblies and free air temperature gauge (if
installed) (Chapter 30 and 95).
Figure 52-11. Windows and Windshields