Eagle ICA-D212-725, Instructions Manual

Page: 672 / 729

ICA-D212-725 (96)
Page 61 of 90
CHAPTER 96 – ELECTRICAL SYSTEM (96-00-00)

COPYRIGHT

2007 BY DART AEROSPACE LTD.

THIS DOCUMENT IS PRIVATE AND CONFIDENTIAL AND IS SUPPLIED ON THE EXPRESS CONDITION THAT IT IS NOT TO BE USED FOR ANY PURPOSE OR COPIED OR COMMUNICATED TO ANY
OTHER PERSON WITHOUT WRITTEN PERMISSION FROM DART AEROSPACE LTD.
Revision:
4
Date: 11.06.01
transistors located on the nose compartment, and
the instrument lights.
96.7.9 Operational Check – Engine
Instrument Panel Lights
96.7.9.1
Apply electrical power to helicopter
electrical system.
96.7.9.2
Rotate ENG INSTR LT control
slightly clockwise until switch just closes. Verify
engine instrument lights are illuminated dimly.
96.7.9.3
Rotate ENG INSTR LT control in
clockwise direction. Verify engine instrument
lights increase in brightness and are brightest
when control is at extreme clockwise position.
96.7.9.4
Rotate ENG INSTR LT control in
counter-clockwise direction. Verify engine
instrument lights decrease in brightness.
96.7.9.5
Rotate ENG INSTR LT control to
OFF. Verify engine instrument lights extinguish.
96.7.9.6
Turn electrical power off.
96.7.10 Instrument Secondary Lights
The instrument secondary lights system consists
of a circuit breaker and secondary lights control on
the overhead console, secondary lights transistor
mounted in the cabin roof and instrument (white)
secondary lights.
96.7.11 Operational Check – Instrument
Secondary Lights
96.7.11.1
Apply electrical power to helicopter
electrical system.
96.7.11.2
Rotate SEC INSTR LT control
slightly clockwise until switch just closes. Verify
instrument secondary lights are illuminated dimly.
96.7.11.3
Rotate SEC INSTR LT control in
clockwise direction. Verify instrument secondary
lights increase in brightness and are brightest
when control is at extreme clockwise position.
96.7.11.4 Rotate SEC INSTR LT control in
counter-clockwise direction. Verify instrument
secondary lights decrease in brightness.
96.7.11.5
Rotate SEC INSTR LT control to
OFF. Verify instrument secondary lights
extinguish.
96.7.11.6
Turn electrical power off.
96.7.12 Pedestal Lights
The pedestal lights system consists of a circuit
breaker and pedestal lights control on the
overhead console, pedestal lights transistor
mounted in the cabin roof, left side, and pedestal
lights.
96.7.13 Operational Check – Pedestal
Lights
96.7.13.1
Apply electrical power to helicopter
electrical system.
96.7.13.2
Rotate PED LT control slightly
clockwise until switch just closes. Verify pedestal
lights, panel lights on pilot collective stick, and
outlet valve lights on right side of doorpost are
illuminated dimly.
96.7.13.3
Rotate PED LT control in clockwise
direction. Verify lights increase in brightness and
are brightest when control is at extreme clockwise
position.
96.7.13.4
Rotate PED LT control in counter-
clockwise direction. Verify lights decrease in
brightness.
96.7.13.5
Rotate PED LT control to OFF.
Verify lights extinguish.
96.7.13.6
Turn electrical power off.
96.7.14 Overhead Console Lights
The overhead console lights system consists of a
circuit breaker and console lights control on the
overhead console, overhead console lights
transistor mounted in the cabin roof, right side,
and overhead console lights.