Pag
e 44
ATTENTION!
For safety reasons, charging should only take place under super-
vision and in a dry environment. Before connecti ng the charger to
the mains, check that the socket, connecti on cable and the charger
itself are undamaged.
Charging prozess - LEDs rotate clockwise
The clockwise rotation of the LEDs
shows the charging speed and charging
current. Towards the end of the char-
ging process, the charging current and
speed of rotation slow down until the
charging process is finally completed
and (if necessary) cell maintenance is
initiated.
2.4 Charging the add-e NE
X
T battery
The add-e NE
X
T battery detects the docking station when placed on it and indica-
tes that it is ready for charging by activating the LEDs on the battery. The charging
process only begins when the battery is fully engaged in the docking station and
the LED on the charger turns red.
Battery charging status from empty to full
The charging process is indicated direct-
ly on the battery by the integrated LEDs.
The current charging status is indicated
by the LED colours according to the
adjacent graphic.
The charging status colours also apply
to the battery status while the bike is in
motion. The current percentage char-
ging status can be found on the add-e
NE
X
T smartphone app.
100%
0%
PLEASE NOTE!
For charging the respecti ve batt ery, it should be placed on the docking
stati on. See page 52. The batt ery should be charged only by using the
docking stati on and the compati ble original charger!
50%
The fully integrated battery management system (BMS) ensures a perfectly "ba-
lanced" battery, monitors the charging and dischargeing of the battery, individual
cell voltages, temperatures and much more. This makes the add-e NE
X
T batteries
among the most modern and best on the market.
25%
75%
