Pag
e 46
2.7 add-e NE
X
T battery as a power bank
In addition to its purpose as a source of energy for electric propulsion, the add-e
NE
X
T battery can also be used as a power bank. The USB-C charging port provided
for this purpose is located on the front top section of the battery.
USB-C charging port
Various devices can be charged with
up to 1.5 amps with a matching USB-C
connection cable. Among others, the
following connection interfaces can be
used:
•
USB-C to Mycro-USB
•
USB-C to Lightning (Apple devices)
•
USB-C to USB-C
The add-e NE
X
T battery
CANNOT
be
charged using an external charger con-
nected to the USB-C socket.
Activating the USB-C port
The USB-C charging port can be used to charge an external device, such as a
smartphone, bike lamp or any other device equipped with a USB socket.
PLEASE NOTE!
The add-e NE
X
T battery needs to be charged up to at least 20% to
enable use as a power bank.
External devices with a very low charging rate may not be detected
properly or may not be fully charged.
Activating the USB-C charging port
1. Rotate the power setting knob by at
least 2 levels to "wake-up" the battery.
The power setting knob lights up in the
colour of the actual charging status.
2. Connect charging cable to the battery.
3. Rotate the power setting knob counterc-
lockwise for at least
3 full turns (360°)
until the LEDs start flashing. The USB-C
charging port now is activated, and the
connected device is being charged.
