Pag
e 42
2.2 Inserting the add-e NE
X
T battery
Placing add-e NE
X
T battery
The "LOCK" arrow is located at the
bottom of the battery below the add-e
logo.
An open and a closed lock are engraved
on the front of the battery holder.
The special design of the bayonet lock
means that the battery cannot be inser-
ted incorrectly.
Push add-e NE
X
T battery into position
1. Position the battery the way that the
arrow is above the open lock.
2. Push the battery downwards so that
the arrow is pointing directly at the
open lock.
The battery needs to be placed on
completely flat the holder.
Fix the add-e NE
X
T battery
3. To fix the battery into place, rotate
it clockwise until it engages and the
arrow points in the direction of the
closed lock.
LEDs pulsate in blue
Once communication has been success-
fully established, the start melody sounds,
and the LEDs light up in the colour of the
charging status.
If the battery continues to pulsate in blue,
communication with the drive unit has
not been established (a software update
may be needed,
see Section 8
).
If the LEDs do not pulsate at all, the batte-
ry may be in deep sleep
(see Section 2.10).
Once the battery is properly inserted and
fixed into place, it establishes communi-
cation with the drive unit and the LEDs
pulsate in blue.
