Pag
e 20
1.3. Variant 3: Installation with the Hebie counterplate
Parts needed:
•
Hebie counterplate
(not included in
standard delivery)
•
Damper plate
•
Stand plate
•
6x M4 Torx screws
•
1x M8 Allen screw
•
M8 cap nut
Fitting the drive unit with Hebie counterplate is done when weather the side stand
nor bottom bracket variants are suitable. Particular attention needs to be paid that
there is sufficient space.
Parts needed for Hebie counterplate installation
Attaching the Hebie counterplate
1. Insert the stand plate between the
rear wheel struts with the M8 bolt
inserted.
2. Attach the Hebie counterplate from
above and tighten it with the M8 cap
nut.
3. Slide the damper plate with the set-
ting gauge attached along the stand
plate towards the rear wheel until it
rests against the tyre.
4. Tighten the damper plate with at
least 2 screws on each side, making
sure the wedge is pointing towards
the chainring, and the setting gauge
is resting against the tyre.
Attaching the Hebie counterplate
With installation variant 3, the stand
plate is attached to the frame with the
Hebie counterplate.
For a detailed description of how to
attach the stand plate, refer to the inst-
ructions for fitting the drive unit to the
side-stand mounting.
See p. 14.
