56
DynaVox Technologies
•
Pause Logging:
Temporarily disable encrypted activity logging. Activity logging can be a powerful
diagnostic tool for clinicians and researchers (section 4.18), but logging should be under your
control. When you select a
Pause Logging
button, its label will change to "Resume Logging.”
Logging will be disabled until you select this button again or re-enable logging by selecting
Tools >
Logging > Resume Logging
. When logging is paused, the logging indicator in the toolbar (section
4.2) will change to indicate the paused state. Note that you cannot manually change the label on
Pause Logging
buttons.
•
Phone: Line:
Dial a phone number or issue the command specified in the
Message
box.
•
Print:
Print the contents of the Editor Window to an attached printer.
•
Set Message:
Assign the contents of the Editor Window to the next
Speak Label
or
Speak Message
button that you select. The
Set
button allows you to construct your own pre-defined words or
phrases for single-button access. Type out the message you want to save, select the
Set
button,
then select a blank button. The label of the blank button will change to reflect its new message. The
next time you select the button, your message will appear in the Editor Window.
•
Sleep:
Turn the Palmtop device off.
•
Speak: All:
Speak the contents of the Editor Window.
•
Speak: Pause:
Temporarily pause speech immediately, resuming with the second button activation.
•
Speak: Sentence:
Speak the last sentence appearing in the Editor Window.
•
Speak: Stop:
Halt speech immediately.
•
Speak: Toggle:
Temporarily disable speech. You might occasionally want to turn off speech for short
periods of time without completely disabling it. A
Speak: Toggle
button will allow you to quickly toggle
between "speech on" and "speech off" modes. An indicator in the toolbar (section 4.2) will let you
know when speech is toggled off.
•
Speak: Word Toggle:
Toggle the "speak after every word" function of your Palmtop device on and
off. For more information on this function, see section 4.9.4.
•
Text: Load:
Load the text file indicated by name in the
Message
box. When you select
Text: Load
,
you will be asked to specify a file name through a dialog that lists all available text files.
•
Text: Save:
Save the text in the Editor Window to the text file indicated by name in the
Message
box. As with
Text: Load
, when you select this action you will be asked to choose a file name from a
dialog. If you do not want to use an existing text file name, select
Cancel
and enter a file name
manually in the
Message
box.
•
Volume Down:
Decrease the system volume.
•
Volume Up:
Increase the system volume.
Summary of Contents for iChat3
