4
Replacement Procedures
4.19
LCD/CAMERA MODULE
4-84 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
9.
Stick the
INSU SQUARE
in place.
10.
Set the
LCD
UNIT
on the LCD COVER ASSY in place.
11.
Connect the
SENSOR HARNESS
to the connector
CN9860
on the 3AXIS SENSOR
BOARD.
12.
Set the
3AXIS SENSOR BOARD
to the LCD COVER ASSY in place.
NOTE:
When setting the 3AXIS SENSOR BOARD, do not touch the IC portion of the
3AXIS SENSOR BOARD.
13.
Confirm that the SHUTTER SWITCH moves properly and move it open position.
14.
Set the
LCD LOW CAP ASSY
to the LCD COVER ASSY while engaging the
latches.
15.
Insert the
LCD HARNESS
into the HINGE L ASSY.
16.
Set the
HINGE L ASSY
to the LCD COVER ASSY and secure it with the following
screws
.
M2.5
2.5C
S-THIN HEAD screw
2
17.
Insert the
CAMERA HARNESS
into the HINGE R ASSY.
18.
Set the
HINGE R ASSY
to the LCD COVER ASSY and secure it with the following
screws
.
M2.5
2.5C
S-THIN HEAD screw
2
19.
Peel off the separator and set the
HINGE CAP L ASSY
to the LCD COVER ASSY
while engaging the latches.
20.
Peel off the separator and set the
HINGE CAP R ASSY
to the LCD COVER ASSY
while engaging the latches.
Summary of Contents for PORTEGE X30W-J
Page 11: ...Chapter 1 Hardware Overview...
Page 39: ...Chapter 2 Troubleshooting Procedures...
Page 139: ...Chapter 4 Replacement Procedures...
Page 229: ...CONFIDENTIAL Appendices...
