dynabook PORTEGE X30W-J, Maintenance Manual

Page: 225 / 282

4.19 LCD/CAMERA MODULE 4 Replacement Procedures
PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-83
NOTE: When replacing the LCD COVER ASSY with a new one, stick new INSU
SQUARE (061) (HD camera model) or CU TAPE (FA camera model),
MAGNET (310)
(non 5G/LTE model) and MAGNET (410) (5G/LTE model) to
the LCD COVER ASSY in place.
1. Stick the CAMERA MODULE to the LCD COVER ASSY in place.
2. Connect the CAMERA HARNESS (FPC portion) to the connector on the CAMERA
MODULE.
3. Arrange the CAMERA HARNESS (FPC portion) to the LCD COVER ASSY in
place.
4. Set the SHUTTER SWITCH to the CAMERA COV ASSY.
5. Set the CAMERA COV ASSY to the LCD COVER ASSY.
6. Stick new D TAPE SEPA (131/141), D TAPE TP SIDE L , D TAPE TP LS L , D
TAPE TP LOW L , D TAPE TP SIDE R , D TAPE LS R , D TAPE TP LOW R
and D TAPE TP L CE to the LCD COVER ASSY in place.
7. Connect the LCD HARNESS to the connector on the LCD UNIT and lay down the
lock bar to engage.
8. Connect the TOUCH PANEL HARNESS to the connector on the TOUCH PANEL.
INSU SQUARE
CU TAPE
MAGNET
MAGNET
Rev.01