dynabook PORTEGE X30W-J, Maintenance Manual

Page: 151 / 282

4.1 Overview 4 Replacement Procedures
PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 4-9
Assembly Procedures
After the computer has been disassembled and the part that caused the fault has been repaired
or replaced, the computer must be reassembled.
Take note of the following general points when assembling the computer.

Take your time and follow the instructions carefully. Hurrying the assembly work
will only introduce new problems.

Check that all cables and connectors are securely connected.

Before fastening FRUs or other parts in place, ensure that no cables are caught on
screws or the FRU.

Check that all latches are securely closed.

When re-assembling, ensure that not to put the excessive power to avoid breaking the
pins and latches.

Ensure that you have installed all FRUs correctly and do not have any screws left
over. Using an incorrect screw may damage the thread or screw head and result in the
FRU not being securely fastened in place.

When re-assembling, ensure that not to break the computer casing and harnesses by
the tools and equipment.

When checking the computer moved correctly, do not put the excessive power on the
hinges and computer itself.
After installing FRUs, check that the computer operates correctly.