4
Replacement Procedures
4.6
SPEAKER
4-26 [CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
Installing the SPEAKER
To install the SPEAKER, follow the steps below and refer to 4-6 to 4-8.
NOTE:
Prepare SPEAKER for non 5G/LTE model, SPEAKER 5G for 5G and LTE
model.
<SPEAKER>
<SPEAKER
5G>
1.
Set the
SPEAKER
or
SPEAKER 5G
(left and right) to the slots of the COVER
ASSY.
2.
Arrange the
SPEAKER HARNESS
in place and fix it with the
INSU KB LOW
or
INSU KB LOW 5G.
3.
Connect the
SPEAKER HARNESS
to the connector
CN6290
on the SYSTEM
BOARD.
4.
Connect the
FP FFC
(finger print sensor model) and
CPAD FFC
to the connectors
CN9550
and
CN9510
on the SYSTEM BOARD.
5.
Connect the marked side of the
FP FFC
(finger print sensor model) and
CPAD FFC
to the connectors on the CLICK PAD.
Cushion
AL TAPE for shielding
Different form and number of cushions
Rev.01
Summary of Contents for PORTEGE X30W-J
Page 11: ...Chapter 1 Hardware Overview...
Page 39: ...Chapter 2 Troubleshooting Procedures...
Page 139: ...Chapter 4 Replacement Procedures...
Page 229: ...CONFIDENTIAL Appendices...