manualshive.com logo in svg

dynabook PORTEGE X30W-J, Maintenance Manual, Page: 188 / 282

Share
Download
dynabook PORTEGE X30W-J Maintenance Manual Download Page 188

4

 

Replacement Procedures

 

4.12

  SYSTEM BOARD 

4-46    [CONFIDENTIAL]  PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) 

4.12 SYSTEM BOARD 

CAUTION:  

 1.

  

If replacing with a new SYSTEM BOARD, update the DMI 

information as described in Chapter 3 “Test Program”. Also update 
with the latest BIOS and EC/KBC as described in Appendix G and in 
Appendix H. 

   

 

2. When replacing the SYSTEM board with a new one, use the sensor 

calibration tool to adjust the sensors. 

   

 

3. When replacing the SYSTEM BOARD with a new one, the ProductKey 

(MBR-DPK) must be written on the SYSTEM BOARD. 

   

 

4.  When removing/installing the SYSTEM BOARD, handle with both 

hands and do not handle with the handling prohibition area (refer to 
the figure below). 

 

Summary of Contents for PORTEGE X30W-J



























































































































































































































































































Reviews:

No comments