SmartVue Operator’s Manual
10-0004-R13
105
17.3 Monitor Data
The
Monitor Data screen displays all of the inputs and outputs, their labels, measured
signal values, and their corresponding scaled values in their specified engineering units
set in the (default)
Configure I/O setup. This screen is useful if you want to monitor all
I/O points at once, including ones that may not be assigned to a meter.
Figure 17-3 The Monitor Data screen
Select
MENU > SmartVue > Monitor Data to display the Monitor Data screen.
17.4 Date and Time
The
Date / Time configuration screen allows you to set the SmartVue’s real time clock.
The time setting is used to display meaningful values on the horizontal time axis on a
meter’s history graph and can be displayed in either a 12-hour (showing AM or PM) or
24-hour mode.
To set the date and time
1.
Press
MENU > SmartVue > Date / Time. This will display the screen shown in
Figure 17-4.
Figure 17-4 Date / Time screen
2.
Press the numerical fields for each date and time value you wish to change.
3.
Select
AM or PM and the time display mode: 12 hr. or 24 hr.
4.
Press
OK.
