OP000469
Operating Controls
2-26
FRONT WINDOWS
Front Upper Window
The front upper window can be housed in the cabin's
ceiling.
Opening the Window
1.
Lower bucket to ground.
2.
Set safety lever (Figure 39) on "LOCK."
3.
Shut down engine by turning key to "O" (OFF) position.
4.
Turn the lock levers (1, Figure 40) towards middle of
window to release the lock.
5.
Holding the lock levers pull window up and then push
it back. Turn the levers to outside to lock window.
6.
Check that lock levers are securely latched in the lock
position.
NOTE:
When the front upper window is open, never
extend your head or body through the window
frame.
NOTE:
If the window happens to fall with a strong
impact against the machine, while some part of
your body is extended out of the cabin, it may
result in bodily injury.
Figure 39
FG007539
WARNING!
When leaving operator's seat, set the safety lever to
"LOCK" position (Figure 39), if not a serious accident
could occur by accidentally moving the work levers.
Figure 40
1
FG007540
WARNING!
When stowing front window in the cabin roof, make
sure both release levers (1, Figure 40) are latched.
Summary of Contents for DX35Z
