Doosan DX35Z, Operation And Maintenance Manual

Page: 80 / 211

OP000469 Operating Controls
2-20
MISCELLANEOUS ELECTRICAL
DEVICES
Cabin Light
A light is installed on the left side on the top of the
operator's cabin.
The light will work despite starter switch position.
NOTE:
If light is left "ON" for a long time while the engine is
not running, the battery will be discharged.
Pilot Cutoff Switch
When the safety lever is put into the "LOCK" position, the
switch deactivates the work and travel levers. With the work
and travel levers deactivated, no digging/operational work
can be done.
Fusible Link
A fusible link is in the engine compartment.
If the engine does not crank, first check that the starter
switch is turned "ON" and that no power is available (No
indicator lights will light.). Check that the "A" portion (Figure
31) of the fusible link is not broken or burned through.
Replace the fusible link if damage and investigate cause.
Figure 29
FG007501
FG007502
Figure 30
HAAE2120
A
Figure 31
WARNING!
When changing the fusible link, replace the fusible link
with the same capacity part. Otherwise, a fire could
break out in the wiring harness and/or other
components of the circuit. Always use original
DOOSAN
parts.