Doosan DX35Z, Operation And Maintenance Manual

Page: 102 / 211

OP000470 Operation
3-12
5. Shut down engine by turning key to "O" (OFF) position
(Figure 23).
6. Remove key from starter switch.
Check and Confirmation After Stopping
Engine
1. Repair excavator, if there are any coolant or oil leaks.
2. Inspect front attachment and under carriage for abnormal
appearances. Correct any problems.
3. Fill fuel tank.
4. Get rid of any accumulated flammable materials such as
leaves and paper etc. in engine compartment.
5. Clean all mud, etc. from undercarriage and tracks. Make
sure that all steps and hand holds are clean, and that the
operator's cabin is clean.
6. Check machine for loose parts
Walk around machine and check for loose parts. Retighten,
as necessary. For example, swivel bearing bolt should be
tightened to 112.8 Nm / 11.5 kg•m (83 ft lb).
FG001364
O
I
Figure 23
Figure 24
IMPORTANT
Place machine on level surface, lower bucket and
blade to ground, shut down engine and lock control
lever.