OP000469
Operating Controls
2-14
1. Engine Coolant Temperature Gauge
The colored bands indicate the temperature of the
engine coolant.
BLUE ZONE (
) - Indicates temperature is lower
than the normal operating temperature.
WHITE ZONE (
) - Indicates temperature is within
the normal operating range.
RED ZONE (
) - Indicates temperature is too high.
During operation, the pointer must be in the white
zone.
If the gauge pointer moves into the red zone, the
engine coolant temperature warning light will turn "ON".
Allow the engine to run at low idle speed until the
temperature gauge registers in the white zone again.
When the white zone is reached, allow the engine to
idle for an additional three - five minutes before
shutting down the engine. If not allowed to idle, heat
surge may develop which will damage the engine.
Allowing the engine to idle will dissipate heat. Check
the coolant level, look for a loose fan belt, inspect for
debris around radiator, and so on.
2. Fuel Gauge
Shows remaining fuel quantity in tank.
BLUE ZONE (
) - Indicates that the fuel level is full.
WHITE ZONE (
) - Indicates a normal fuel quantity.
RED ZONE (
) - Indicates that the fuel level is low.
If the gauge pointer moves into the red zone, the fuel
warning light will turn "ON" in the instrument panel.
Stop operation and immediately and add fuel.
Check the fuel level on firm, level ground.
BLUE
RED
WHITE
FG007497
C
H
Figure 16
FG007498
WHITE
RED
BLUE
Figure 17
Summary of Contents for DX35Z
