OP000470
3-41
Operation
Operation in Rainy or Humid Conditions
Operation under rainy conditions is similar to that as in extreme
heat procedures listed previously.
1.
Keep all exposed surfaces coated with preservative
lubricating oil. Pay particular attention to damaged or
unpainted surfaces. Cover all paint cracks and chip marks
as soon as possible to prevent corrosive effects.
Operation in Salt Water Areas
The corrosive effect of salt water and salt water spray is very
extensive. When operating in salt water areas, observe the
following precautions.
1.
When exposed to salt water, dry machine thoroughly and
rinse with fresh water as soon as possible.
2.
Keep all exposed surfaces coated with preservative
lubricating oil. Pay particular attention to damaged paint
surfaces.
3.
Keep all painted surfaces in good repair.
4.
Lubricate machine as prescribed on lubrication chart on
machine or "Periodic Service Table and Chart" Section 4,
in this manual. Shorten lubricating intervals for parts
subject to exposure to salt water, if found necessary.
Operation at High Altitudes
Normally, operation of machine at high altitudes will be as
outlined in extreme cold. Before operating at high altitudes,
engine fuel and air mixture may have to be adjusted according to
appropriate engine manual.
1.
Check engine operating temperature for evidence of
overheating. The pressure cap on radiator must make a
perfect seal to maintain coolant pressure in the system.
Summary of Contents for DX35Z
