RF Baghouse, Models RFWP and RFWPH
32
Cleaning Mechanism Installation
The H-frame for the cleaning system can now be installed into
the Clean Air Plenum.
1. Lift the H-frame into position, ensuring it remains
horizontal throughout the lifting and lowering process.
Lower the H-frame into the Clean Air Plenum.
Lowering the H-frame into position
can create pinch points. Take
proper precautions to avoid personal injury.
2. Bolt the H-frame into position using 1/2-in hardware,
ensuring it is parallel relative to the Clean Air Plenum
body flanges.
3. Apply sealant to the bottom bolt flange of the air tank.
4. Bolt the Air Chamber Tee to the Air Tank with 3/8-in
hardware per the provided print.
5. Lower the Air Tank assembly into the clean air plenum
and into the H-frame as shown.
a. Slide the centering plate onto the cleaning assembly
shaft and temporarily secure it to the shaft with tape.
Failure to do so will result in re-lifting the air tank at a
later time.
b. Square the air tank assembly and connect the (4)
½-in corner bolts, which holds the air tank assembly
to the H-frame. Leave connecting hardware hand-
tightened at this time.
air tank
air chamber tee
clean air plenum
H-frame
cleaning
assembly
shaft
centering
plate
air chamber tee
(bottom view)
Cleaning Mechanism Installation
