RF Baghouse, Models RFWP and RFWPH
16
2. After assembling the perimeter body panel assembly,
install the interior baffles by bolting them to the inlet
assembly.
3. Off to the side, assemble the inner flow straightener ring.
The inner ring panels overlap each other to complete the
ring. Orient all hardware bolting from the outside of the
ring to the inside of the ring to eliminate any interference
in the next step. Lift and then lower the inner flow
straightener ring into the center of the inlet as shown.
inlet assembly
interior baffle
inner flow
straightener ring
90 body
involute inlet
o
Improper installation of internal
baffles and inner flow straightener
ring will compromise structural integrity. Ensure
proper installation of the internal baffles and
inner flow straightener ring.
4. Rotate the inner flow straightener ring until all adjoining
flanges make contact. Bolt together and tighten all bolts.
Inner Flow Straightener Ring Installation
