Putting the device into operation
100
Status LEDs
Following commissioning you can use the status LEDs on the Access
Manager to establish whether all connected passive readers or external
readers of the ENiQ Module Reader are installed properly and recognised by
the control unit. You will receive information about wireless and Ethernet on
the RF Net Manager.
For the signals to be displayed, internal DIP switch 4 must be set to ON.
ENiQ Access Manager, Access Manager Terminal, Access Manager ITT and
DOM Tapkey Access Manager Compact
The LED for readiness for operation lights up orange when the power supply
is connected.
If the LED does not light up, check the connection to the power supply.
ENiQ/DOM Tapkey schematic diagram
