Completing installation
57
Place the housing cover on the
frame with the locking points
offset and push it gently
downwards until it clicks into
place.
ATTENTION!
Destruction of the electronics through voltage peaks
During voltage supply to the device with DC voltage,
actuators such as door openers, hold-open magnets
etc. represent an inductive load.
In this case, use a flyback diode.
You can trigger actuators such as
door openers, hold-open magnets
etc. using the device. These
actuators represent an inductive
load. For voltage supply with DC
voltage you must use a flyback
diode.
Use the flyback diode anti-
parallel to the inductive load.
Flyback diodes are usually provided with the door openers from external
manufacturers.
ELS Siedle Vario
Insert the reading module as
shown.
Press the reading module
backwards until it audibly clicks
into place.
