Programming a device
110
Programming and management with software or app
The electronic circuitry has an Ethernet and a wireless interface for
commissioning, programming and management using the ENiQ Access
Management software, ELS software or ELS mobile software. Data can be
exchanged with a PC/laptop/server via these interfaces. For communication
via the wireless interface you will require the DOM wireless USB stick 868
MHz (ELS), DOM USB-BLE stick (ENiQ) and the RF wake-up card and/or the
RF online card. You can obtain information about this directly from DOM-
Sicherheitstechnik. You will find corresponding instructions on the CD of the
respective software product and also on the DOM homepage at: www.dom-
security.com
For commissioning and management of the DOM-ENiQ devices with the ENiQ
app, follow the instructions in the app. You will always find the function “Add
devices” in the menu item “Devices”. The function is started by tapping on the
“+” symbol and you will be guided through the steps which follow.
You can find the Smartphone compatibility list at: http://www.dom-
security.com/eniqapp
Before you can add the devices via NFC interface or via BLE, you must
first hold the master card, previously read into the app, in front of the
corresponding read field on the devices. The device is now initialised
and can subsequently be added to the app.
DOM Tapkey Access Manager Compact & HiSec:
The DOM Tapkey devices can only be put into operation by using the Tapkey
app.
Follow the instructions in the Tapkey app for initialisation.
