Intended use
9
Safety
Intended use
The devices are used for access control and management of access
authorisations in buildings. The system families are based on RFID (Radio
Frequency Identification) technology and differ in terms of the frequency used.
ENiQ and DOM Tapkey use 13.56 MHz, while ELS uses 125 kHz.
Proper use includes reading and understanding these instructions as well as
observing and following all the information provided in these instructions,
particularly the safety instructions. Any other use is expressly deemed
improper and will render warranty and liability claims null and void.
Ambient conditions
Make sure that the devices are only used under the following ambient
conditions:
Temperature range: –20 °C to +55 °C
Air humidity: 20% to 95% (non-condensing)
Fundamental safety information
The devices are built according to the latest engineering standard and
recognised safety regulations. During work with and on the devices, however,
residual risks remain which can cause risks to life and limb. For this reason,
the following safety instructions must be heeded and followed.
Avoid risks of explosion
The devices are not explosion-proof. Installing and operating the devices in a
potentially explosive area can lead to serious injuries or death.
Only install and operate the devices in areas where there is no potentially
explosive atmosphere.
Risk of injury by swallowing small parts
Children can become injured after swallowing small parts.
Make sure that small parts e.g. locking media or screws are kept out of the
reach of children.
