Creating locking or programming media offline without software
109
ENiQ devices
Proceed as follows to create locking or programming media offline without
software:
Hold the master card directly in front of the DOM device, approx. 1 cm away
from it (control unit for HiSec).
Remove the master card once again.
The four LEDs flash blue once and green twice briefly. You will hear an
audible signal each time.
Hold the programming media or locking media to be created directly in front
of the control unit in turn and wait briefly for signalling.
The four LEDs briefly flash green once. You will hear an audible signal each
time.
To end the programming process wait for around five seconds or hold the
master card directly in front of the control unit.
The four LEDs light up blue once for a while, then the upper LED lights up red
again permanently.
Now, you can create or delete locking media with the authorised programming
card and activate the device with the authorised locking media.