Installing an external reader and connecting it to Access Manager
(control unit)
83
Insert the guide strips of the front module into the guide openings of the
back module.
Make sure that all the direct connector pins are inserted into the socket of
the back module without twisting.
Touch and press the front module only at the edge of the module and in the
area of the contact protection film.
Press the front module together with the standard intermediate frame as far
as it will go onto the cover frame.
Screw the components tight using the two safety screws.
The cover frame and standard intermediate frame are automatically fixed in
place and held in this position.
Contact protection film
Standard intermediate
frame
Cover frame
Place the design film between the transparent cover and snap-fit frame.
Snap the transparent cover into place in the snap-fit frame.
LED and symbols must be on the same side.
Snap-fit
Symbol area
Snap-fit frame
Snap-fit
Make sure that the contact protection film is in place on the front module.
Fit the components locked in place evenly onto the front module.
Insert the snap-fit into the insertion openings on the front module and press
it firmly until it snaps into place.
