Docomo N-05A, User Manual

Page: 75 / 601

73 Continued on next page
V
oice/Vid
eophone Calls
1
i
“Phone” “Check
Phone setting” “Other
settings” “Sub-address”
“ON” or “OFF”
Setting the Alarm Used for
Reconnection
<Reconnect signal>
When the signal quality deteriorates during a
voice/videophone call and the call drops out,
the FOMA terminal will automatically
reconnect the call if the signal quality quickly
improves. Set the type of alarm when a call is
reconnected for this function.
z
The interval for reconnection varies
depending on communication conditions or
the signal quality. It takes about 10 seconds.
1
i
“Phone” “Check
Phone setting” “Talk”
“Reconnect signal”
Select an alarm tone
Select from “No tone, High tone, Low
tone”.
Blocking Out Ambient Noise
<Noise reduction>
This function suppresses ambient noise and
makes it easier for the other party in a voice or
videophone call to hear you.
1
i
“Phone” “Check
Phone setting” “Talk”
“Noise reduction” “ON”
or “OFF”
Making Handsfree Calls in the
Car
<In-car Hands-free>
You can make or receive voice calls with
handsfree compatible devices by connecting
the FOMA terminal to handsfree compatible
devices such as the In-Car Hands-Free Kit 01
(optional) or a car navigation system.
For information on how to use the handsfree
device, refer to the manual provided with the
device. The FOMA In-Car Hands-Free Cable
01 (optional) is required to use the In-Car
Hands-Free Kit 01 (optional).
N
z In the following cases, “
*
” does not function
as a sub-address separator. The entered
number including “
*
” is recognized as an
ordinary phone number:
• When the “
*
” is entered at the beginning of
a phone number
• When “
*
” immediately follows “186”/“184” at
the beginning of a phone number
• When “
*
” immediately follows a number
entered using “Prefix numbers”
• When the phone number contains “
*
590#/
*
591#/
*
592#”
N
z
Call charges apply in the interval (up to about
10 seconds) for reconnection.
N
z
To operate from the handsfree device, set the
USB mode to “Communication mode”.
z The display and ring tones used for incoming
calls and mail are as specified in the FOMA
terminal settings.
z When the handsfree device is set to emit the
sound from the handsfree device, the ring tone
still sound through the handsfree device even
when the FOMA terminal is set to Manner
mode or the ring volume is set to “Silent”.
z When the Public mode (Driving mode) is set,
operation for incoming calls and messages is
as specified in the “Public mode (Driving
mode)” settings.
z
When the Record message is set, operation
for incoming calls is as specified in the
“Record message” settings.