Docomo N-05A, User Manual

Page: 432 / 601

430
Netw
ork Ser
vices
Stand-by display …… Sets the standby
screen displayed in B mode or Dual mode
respectively. → P.114
“
★
” appears for the changed item. Press
o
(Reset) to reset to the default setting.
Set call/receive No.
Disp. call/receive No. …… Sets to
display the information (name, phone
number, mail address, etc.) of “Number
A (Address A)” and “Number B (Address
B)” in different font color to distinguish
when making/receiving a call.
Press
o
(Switch) to switch the color of
the pallet (16 colors or 256 colors).
Press
p
(Reset) to reset to the default
setting.
Ringtone for Number B
……
Sets the
operation for incoming calls in Number
B. Sets
①
Ring tone,
②
Incoming call
screen, ③ Illumination, ④ vibration and
⑤
answering message in the “Voice call
(recv.)” and “V. phone (recv.)”. Sets ①
Ring tone,
③
Illumination, and
④
vibration in the “Mail (recv.)”.
Voice call (recv.), V. phone (recv.),
Mail (recv.)
……
① Ring tone: Go to Step 2 in the
“Select ring tone” (P.106)
② Image: Go to Step 1 in the
“Display setting” (P.116)
③ Illumination: Go to Step 1 in the
“Illumination” (P.121)
④ Vibrator: Go to Step 2 in the
“Vibrator” (P.108)
⑤ Answer message: Go to the
operation after selecting “ON” in
Step 1 in the “Setting Record
message” (P.81)
2in1 function OFF
……
Sets 2in1 to OFF.
Rcv. avoid. setting …… Restricts incoming
calls for Number A and Number B.
Change rcv. avoid.
……
Sets the Rcv.
avoid. setting for Number A and Number
B.
Check rcv. avoid.
……
Checks the Rcv.
avoid. setting for Number A and Number
B.
Mode link
……
Sets the linkage for
changing 2in1 mode and Rcv. avoid.
setting. Incoming calls only for Number
A are accepted in A mode, incoming
calls only for Number B are accepted in
B mode, and incoming calls for both
mode are accepted in Dual mode.
* When the function is activated, you
cannot switch the mode with “ ”
displayed.
Rcv. avoid. (abroad) …… Sets the Rcv.
avoid. setting overseas (when Mode link
is active, the Rcv. avoid. (abroad) is
disabled).
N
z When 2in1 is set to OFF, you can also perform
“2in1 settings” by pressing
2
for 1 second
or longer on the standby screen.
<Mode switching>
z You can also change mode by pressing
2
for 1 second or longer on the standby screen.
<Phonebook 2in1 setting>
z
You cannot set this function to UIM phonebook
entries.
z
Select “Display detail” from the function menu
to display “Phonebook detail screen” from
“Phonebook list screen” in this function.
<Stand-by display>
z
When Change Mode is set to A mode, standby
screens are displayed according the settings.
z
When set to the Kisekae Tool you
downloaded, the i-
α
ppli standby screen or the
random display, the default screen appears
even when “Same as Number A” is set.