Docomo FOMA D851IWM, User Manual

Page: 328 / 460

326
O
the
r C
o
n
v
e
n
ie
nt
Fun
ct
io
n
s
4
&
to switch to
Set sound
screen
z
Select and set each item
5
&
to switch to
Set others
screen
z
Select and set each item
6 Press
p
In the stand-by screen, or (when a
schedule alarm is also set) is displayed.
When the set time comes
The alarm screen appears and the alarm sounds. As
the alarm screen, the following screen or the video/
i-motion you set is displayed. The alarm sounds at
the set volume. If lighting or vibrator is set, it operates
according to its setting.
･
Pressing
f
while the alarm is sounding finishes
the alarm sound and the display before sounding
reappears.
･
If the terminal is left unoperated for about 1 minute
or a key other than
f
is pressed, the alarm sound
stops, and the terminal keeps ringing for 1 minute
followed by a 4-minute silent period repeatedly for
30 minutes (snooze operation). If video/i-motion is
set, the first image is displayed. If an incoming
voice call or video-phone call is received while the
alarm sounds, snooze operation also starts in the
same way.
･
If some operation such as a call is going on at the
set time, the terminal operates as follows:
･
During a call, the warning sound but the alarm
occurs and the alarm screen appears. In addition,
the vibrator does not operate even if FOMA
terminal has been set to notify a call by vibration.
During On-hold, the above operation is available
after canceling On-hold.
･
When power is off, neither the power is turned on
nor the alarm sounds. To sound the alarm, set
Alarm Auto Power ON to ON .
･
When the set time arrives during data
transmission/reception (except packet
communications) or while making, receiving or
disconnecting a call, the alarm operates after
those operation ends.
INFORMATION
●
When multiple alarms are set for the same time, the
alarm set for the smallest item number in the alarm
list is activated.
●
When an alarm and a schedule alarm are set for the
same time, the screen that notifies the alarm
appears at first, followed by the snooze operation
and then the schedule alarm is notified. Even if the
schedule alarm screen is finished, the snooze
operation of the alarm is continued.
●
When a Chara-den image is displayed at the set
time, the alarm may sound a few seconds late.
● When All Lock or PIM Lock is activated, the alarm
does not sound.
Title :
Up to 14 one-byte or 7 two-byte characters
can be entered.
･
The titles are set to
アラーム1
to
アラーム
9
by default. If the title field is not entered,
the alarm cannot be set.
Alarm sound :
Select i-motion or Melody and select a video/
i-motion file or a melody as an alarm.
･
To playback and check the melody or
video/i-motion you select
☛
P116
Volume :
Select the volume.
･
Adjusting the volume
☛
P68
Vibrate alert
:
Set the vibration used at the alarm time.
Lighting pattern :
Set the lighting pattern of the call indicator
for the alarm time.
･
When Sync melody or OFF is set, Lighting
color cannot be set.
Lighting color
:
Set the color of the call indicator for the
alarm time.
Al
a
rm
Clo
c
k
MP#3̲E.book 326 ページ ２００６年３月８日 水曜日 午後５時１８分