Docomo FOMA D851IWM, User Manual

Page: 431 / 460

2
To view “FirstPassManual” (PDF format), Adobe
Reader (version 6.0 or later recommended) is
required. If Adobe Reader is not installed in your PC,
download the latest version from the Adobe Systems
Incorporated website. (Communication fee are
separately required for downloading.) See the Adobe
Systems Incorporated website for details.
■ Operating environment for the FirstPass PC
software
*1 May vary with the PC system configurations.
To perform data communication from FOMA terminal,
the following conditions must be satisfied.
･
The PCs which may use the included USB cable.
･
You must be within the FOMA service area.
･
Packet communication requires an access point
that supports FOMA packet communications.
･
64K data communication requires an access point
that supports FOMA 64K data communications or
ISDN synchronized 64 kbps.
However, even when the above requirements are
satisfied, you may not be able to perform data
communication if base station traffic is heavy, or the
signal quality is poor.
Flow of setup for data communication
The setup work needed to connect FOMA
terminal to a PC to perform packet or 64K data
communication is as follows:
Communication configuration file (driver)
Install the communication configuration file on a PC
from attached CD-ROM, before connecting FOMA
terminal to a PC to perform data communication in
the communication mode.
Item Requirements
PC PC/AT compatible computer
OS The Japanese version of
Windows 98SE, Me, 2000 or XP
Memory
requirements*
1
Windows 98SE, Me, 2000: 32MB
or more
Windows XP: 128MB or more
Hard Disk
Capacity*
1
10 MB or more free disk space
Browser Microsoft
®
Internet Explorer 5.5 and
later version
For Windows XP, Microsoft
®
Internet
Explorer 6.0 and later version
Conditions of packet communication and
64K data communication
Glossary of Data communication
● Administrator privilege
A user level that provides complete access to all OS
functions in Windows XP and 2000. There must be
at least 1 user that has administrator privileges for
each PC. A user that has no administrator privileges
is not normally allowed to install/uninstall drivers and
software.
● APN (Access Point Name)
String to identify a provider or in-house LAN to
connect with by packet communication. The APN for
mopera U is “mopera.net” and mopera is “mopera.ne.jp”.
● cid (Context Identifier)
The registration number when writing packet
communication dialup connection (APN) information
to FOMA terminal. 10 numbers from 1 to 10 are
available for FOMA terminal.
“mopera.ne.jp” is registered in cid1, and “mopera.
net” in cid3.
●
W-TCP
A TCP parameter designed to fully utilize TCP/IP
transmission capacity during packet
communications in a FOMA network. This
communication setting is essential to enable full use
of FOMA terminal capability.
Install FOMA PC configuration software
☛
P6
(Easy Setup)
Packet communication
setup
● mopera U / mopera
☛
P7
● Other provider
☛
P8
(Easy Setup)
64K data communication
setup
●
mopera U / mopera
☛
P10
● Other provider
☛
P10
Execute communication
☛
P11 (Disconnect
☛
P12)
Set up communications without using FOMA PC
configuration software
☛
P15
Connect
☛
P23 (Disconnect
☛
P23)
Install communication configuration file
☛
P4
Connect a PC to FOMA terminal
☛
P3
Check communication configuration file
☛
P5
Manual for Data Communication.fm 2 ページ ２００６年２月１０日 金曜日 午後７時３９分