Docomo FOMA D851IWM, User Manual

Page: 408 / 460

406
A
p
pe
nd
ix
/D
a
ta
I
n
te
rc
ha
ng
e/
T
rou
bl
e
s
h
o
o
tin
g
instead of Movie ringtone. If you set video/i-motion
as an image, the first image is displayed.
●
Any incoming video-phone call cannot be answered
during download. Unanswered calls are recorded as
missed ones in the received call history.
●
Even if any alarm is set while software is being
updated, the updating continues without activating
the alarm.
●
For software update, SSL session is established to
the server (our site). Enable SSL certificate in
Certificate Setting. Configured as valid by default.
☛
P195
●
Software update should be done with battery fully
charged and enough battery power ( ).
●
It is recommended that software update be executed
when good signal quality is obtained, 3 bars of the
antenna icon ( ) are displayed and the terminal is
not being moved.
･
If radio wave signals become weaker during
software downloading or downloading has
stopped, retry software update in a place with
strong radio wave signals.
●
A displayed icon for the message stored at i-mode
Center disappears after software update.
If Receive Option Setting is set to ON and mail
arrives during software updating, the screen that
notifies an arrival of mail in the i-mode Center may
not appear after the software update being
completed.
●
Never remove the battery pack while updating
software. Update may fail.
●
Software update can be done while various data,
such as the phonebook entries registered in FOMA
Terminal, camera images, downloaded data are
retained; however, note that data protection
sometimes cannot be secured according to the
conditions of your FOMA terminal (such as
malfunction, damage, or water leak). DoCoMo
recommends to back up necessary data. (Note that
some data such as downloaded data may not be
backed up.)
●
When software update has failed, the message
Rewrite failed appears and all the operations are
unavailable. In such a case, please bring FOMA
terminal to a repair office designated by DoCoMo.
●
If your software does not need to be updated when
you check for a software update, “No update is
needed. Please continue to use as before.”
●
Software update is available even if the host
selection setting is other than i-mode.
Starting Software Update
1
m886
2 Enter the terminal security code
z
Check
notice and
o
･
The entered terminal security code (4 to 8
digits) is displayed as “
＊
”.
･
The terminal security code by default is set to
“0000”.
3
o o
z
Confirm whether software
update is required
･
Pressing
o
on the confirmation screen for
sending terminal ID makes connection to the
server and your private information concerning
the mobile phone (such as model, serial
number) is sent.
S
o
ft
wa
re
Up
d
a
te
MP#3̲E.book 406 ページ ２００６年３月８日 水曜日 午後５時１８分