Docomo FOMA D851IWM, User Manual

Page: 85 / 460

83
M
a
ki
ng
/R
ec
ei
v
ing
V
id
e
o
-p
h
o
n
e
C
a
lls
Switching from a video-phone call to a voice call
You can switch to a voice call by operating from the submenu during a video-phone call when the
other terminal is compatible with switching calls. Switching can be performed only from the
terminal which made the video-phone call.
･
This operation can be performed between the terminals that support switching between voice call/
video-phone call.
･
To switch to a voice call, the other party needs to set
Indication ON
of Notify Switchable Mode in
advance.
☛
P92
1 m1
during a video-phone call
z
Select
YES
･
A guidance informing that the call is switched is played during switching.
･
Select NO to return to the video-phone talking screen.
INFORMATION
● For precautions when switching between a voice and video-phone call, see INFORMATION in “Switching from
a voice call to a video-phone call”.
☛
P55
●
Switching from a voice call to a video-phone call
☛
P55
Transmitting tone signals (DTMF)
Send DTMF
You can input tone signals (DTMF) while sending your self image ( ), the camera-off image ( ) or
Chara-den ( ).
･
The signals may not be received depending on the device of receiver side.
1
m6
during a call
z
Enter with dial keys
The entered number is displayed and the tone signals (DTMF) are transmitted.
･
To cancel transmitting tone signals (DTMF):
c
･ The tone signals (DTMF) are transmitted by pressing dial keys only even without pressing
m6
while your self image is being sent.
･
When the tone signals (DTMF) are transmitted, the set frame and still image are canceled.
･
Because tone signals (DTMF) are transmitted using dial keys, you cannot use dial keys to make
actions while sending Chara-den.
M
a
k
ing
v
ide
o-
ph
on
e
cal
ls
MP#3̲E.book 83 ページ ２００６年３月８日 水曜日 午後５時１８分