Docomo FOMA D851IWM, User Manual

Page: 437 / 460

8
ユーザーの選択
(Selection of the users that are
allowed to access the connection) is not
displayed.
7 Check that
最適化を行う
(Optimize) is
selected and click 次へ
･
This screen is not displayed if optimization has
already been performed.
8
Check the settings and click
完了
9
Click
OK
The PC must be rebooted for the changes to take
effect. Click
はい
when a window prompts you to
reboot the PC.
･
If optimization of W-TCP setting has already
been performed, rebooting is not required.
･
Performing communication
☛
P11
･
Using mopera U / mopera
☛
P7
1 Perform Steps 1 to 4 of “Using mopera U /
mopera” of “Setting packet
communication by easy setup”
☛
P7
･
Select
その他
(Others) in Step 3 for the dialup
connection.
2
Enter any connection name
z
Click
接続
先
(
APN
)
設定
(Set dialup connection
(APN))
･
The following characters (one-byte) cannot be
entered:
￥
/ :
＊
? !
<> ｜
■ Advanced setting (TCP/IP setting):
Click
詳細情報の設定
(Set detail info) to
display
IP
アドレス
(IP address) and
ネーム
サーバー
(Name server) setting screens.
When dialup information for the provider you
subscribe to, or the in-house LAN is required,
register addresses based on the information
assigned.
3 Set dialup connection (APN)
By default, “mopera.ne.jp” is registered in cid1,
and “mopera.net” for cid3. Register dialup
connection (APN) for cid 2 and 4 to 10.
a
Click
追加
(Add)
接続先
(APN)
の追加
(Add dialup connection
(APN)) screen is displayed.
Using other providers
Next
Manual for Data Communication.fm 8 ページ ２００６年２月１０日 金曜日 午後７時３９分