-80
03 dB
NL
Not locked
Front Panel Lockout
Setting the Front Panel Lockout
The DR500 allows you to inhibit, or lockout, any command entries. To do
this press:
The front panel displays
LOC
indicating that the front panel has been
locked. When the front panel has been locked, both the front panel and
the remote control will be non-functional. The only command that will be
accepted by the DR500 is the command to clear the front panel lockout.
Clearing the Front Panel Lockout
To clear the front panel lockout, press:
The front panel lockout command will be cleared and the DR500 will
receive all commands through the front panel and be fully functional
again.
DMX MUSIC/DJ Functions
Checking the DR500’s ID Number
Every DR500 Receiver has a specific identification (ID) number which is
located on the back of the DR500. To check the DR500’s ID number
using the DMX MUSIC/DJ, press:
