1-8
Amplitude compression, 1 is minimum, 8 is
maximum. Low amplitude signals are amplified and
peaks compressed. Absolute signal level
maintained.
3. Enter the dynamic range code using the
TUNE
? and
TUNE
? ?
buttons to make your selection. The dynamic range is changed on
the?
fly to allow preview. Press
STORE
to save your selection.
If there are less than 10 Dynamic Range settings programmed, the
new setting will be stored in memory. The DR500 will automatically
implement the selected dynamic range when the specified channel is
tuned.
If you have exceeded the 10-channel maximum, the DR500 front panel
displays
FUL
indicating the memory is full. When
FUL
displays, the
DR500 memory must be completely cleared before additional Dynamic
Range settings can be entered. Refer to
Clearing the Dynamic Range
for this procedure. Pressing
PRESET
while entering a Dynamic Range
code exits the procedure and returns the display to the current channel.
Dynamic range settings specified for individual channels will override, or
take precedence over, global dynamic range default settings.
Checking Dynamic Range Settings
To check the dynamic range for a specific channel:
1. Tune to the desired channel.
2. Press:
The front panel flashes the current dynamic range code (0-8) for this
channel. If a specific dynamic range has not been set, the front panel
displays a flashing three-digit number representing the global default for
that channel.
