• DR500 Digital Audio Satellite Receiver — receives and decodes
the digital audio programming information and sends it to your
stereo amplifier system
Additional DR500 receivers provide you with additional
flexibility to create tailored music programs for multiple
business environments that you can vary by the hour.
Additional units can be integrated into your system at any
time.
• Remote Control device — allows you to control and program the
DR500 Receiver and DBS system
There are two available remote control devices: the DMR-22,
which is a basic remote control device, and the DMR-28 DMX
MUSIC/DJ, which provides additional programming information
and functionality.
DR500 System Components
The DR500 Digital Audio Satellite Receiver is a digital audio stereo
decoder that easily integrates with most stereo or monaural amplifier
systems.
DR500 Digital Audio Satellite Receiver
The DR500 is the master receiver that connects to the satellite dish and
your stereo or monaural amplifier system.
DR500 Front Panel
The front panel of the DR500 is used to turn the DR500 on and off and
manually select music channels. The front panel consists of:
• Power selector — turns the DR500 on and off
When the DR500 is Off, a decimal point illuminates on the
front panel, indicating that the DR500 is able to receive any
information from the DMX MUSIC/DBS National
Authorization Control Center.
• Music channel selectors — allow you to tune to the next higher ?
or lower ? channel.
If remote channel selection is preferred, use either the DMR-22 or
DMR28 DMX MUSIC/DJ Remote Controls.
• Front panel display — shows the current channel selection as well as
other DR500 information.
