The exclamation point identifies information that requires careful
attention in order to prevent equipment damage and/or injury to the
operator.
Getting Started
Before you begin using the DR500 Receiver, you need to:
• Install the DMX MUSIC/DBS receiver and equipment, which is
generally done by your local DMX MUSIC affiliate or a professional
installer.
If your DMX MUSIC/DBS receiver and equipment have not been
installed, refer to
Section 2: Installation.
• Read the appropriate sections of this User Guide as noted below.
Do not plug in the DR500 Receiver until you have connected the system
and read
Section 3: Basic Operations.
If you are new to satellite communications or are unfamiliar with either the
DR500 or the remote control, you should read the following sections
before unpacking or operating this product:
• Section 1 for an overview of the DMX MUSIC/DBS system and
equipment
• Section 2 helps you get started and contains a full set of DR500
connection procedures
• Section 3 for DR500 start-up and basic operations
• Section 5 to review maintenance procedures or if you encounter
difficulties and need troubleshooting information
• Other sections as needed
If you are an experienced user familiar with the DR500 and its remote
control, you may wish to review the following sections before unpacking
or operating this product:
