NOTICE
This publication (PN 9000-2423-7006 Rev B) and its contents are
proprietary to DMX and are intended solely for the contractual use of its
customers for no other purpose than to operate the equipment described
herein. This publication and its contents shall not be used or distributed for
any other purpose and/or otherwise communicated, disclosed, or
reproduced, an any way whatsoever, without the prior written consent of
DMX.
For the proper operation of this equipment and/or all parts thereof, the
instructions in this guide must be strictly and explicitly followed by
experienced personel. All of the contents of this guide must be fully read and
understood prior to operating any of the equipment, or parts thereof.
FAILURE TO COMPLETELY READ AND FULLY UNDERSTAND AND
FOLLOW ALL OF THE CONTENTS OF THIS GUIDE PRIOR TO
OPERATING THIS EQUIPMENT, OR PARTS THEREOF, MAY RESULT
IN DAMAGE TO THE EQUIPMENT, OR PARTS THEREOF, AND TO
ANY PERSONS PERSONS INSTALLING AND/OR OPERATIING THE
SAME.
DMX does not assume any liability arising out of the application or use of any
products, component parts, circuits, software, or firmware described herein.
DMX further does not convey any license under its patent, trademark, copy
right, or common-law rights nor the similar rights of others. DMX further
reserves the right to make any changes in any products, or parts thereof,
describe herein without notice.
© Copyright 1999 Digital Music Express
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference.
Antenna
lead in
wire
Ground
clamp
Antenna
discharge unit
(NEC Section 810-21)
Grounding Conductors
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC ART 250, Part H)
Ground Clamps
Electric
Service
Equipment
Figure 1
Example of antenna grounding as per
National Electrical Code, ANSI/NPFA 70
NEC - National Electrical Code
