Correcting Errors
Sometimes you may make an error when entering data. If this occurs, you
can start over after waiting for the command to timeout as indicated by
the display returning to channel indication. Alternatively, changing
channel with the up/down keys will terminate any command immediately.
Checking the Clock
Once the DR500 clock has been initialized by the DMX MUSIC/DBS
National Authorization Control Center and settings have been stored, the
clock setting can be checked. Press:
The front panel displays a flashing two-digit number that is the current
hour in 24-hour mode. The time displays for approximately five seconds
and then automatically displays the current channel.
If the DR500 clock has not been initialized by the Control Center, the
front panel displays 99.
Setting the Volume
You control the volume of the DMX MUSIC music through your stereo
system and the volume control keys located on the remote control.
The volume control keys on the remote control may be off or deactivated.
To turn these keys on, press:
The DR500 front panel displays
On
indicating the volume control keys
are ready for use. Then use the
VOL
? key to turn the volume up and the
VOL
? key to turn the volume down.
