DL JCPT-HD/DC Series, Training Manual

Page: 4 / 119

培训手册
Training Manual
目录
Contents
JCPT-HD/DC
www.cndingli.com
ii
2.2
进入机器模式选择状态（
Get To The Machine Option Selection Mode
）
..... 5-5
2.3
选择机器模式代码（
Entering The Machine Option Selection Mode
）
.......... 5-6
2.4
保存新的数据
(Save The New Values) .................................................................... 5-7
2.5
机器模式（
Machine Options
）
............................................................................... 5-8
传感器设定及称重标定
Sensor Setting And Load Calibration
............................................... 6-1
1.
传感器设定（
Sensor Setting
）
......................................................................................... 6-2
1.1
水平传感器设定（
Tilt Sensor Set State
）
............................................................ 6-2
1.2
角度传感器设定（
Angle Sensor Set State
）
....................................................... 6-3
2.
载重校验（
Load Calibration
）
.......................................................................................... 6-4
2.1
空载校验（
Empty Load Calibration
）
................................................................... 6-4
2.2
满载校验（
Full Load Calibration
）
........................................................................ 6-5
电气原理图
Electrical Schematic
.................................................................................................. 7-1
液压原理图
Hydraulic Schematic .................................................................................................. 8-1
报警代码及解决办法指导
Fault Code With Troubleshooting
.................................................. 9-1
常规保养
Daily Maintenance
........................................................................................................ 10-1
1.
液压油更换（
Hydraulic Oil Change
）
........................................................................... 10-2
2.
液压油滤更换（
Hydraulic Filter Change
）
................................................................... 10-4
3.
电池的维护（
Maintenance Of Battery
）
....................................................................... 10-4
4.
驱动轮毂维护（
Wheel Drive Hub
）
................................................................................ 10-5
5.
滑块和滑槽的保养（
Slider & Spout maintenance
）
.................................................. 10-6