DL JCPT-HD/DC Series, Training Manual, Page: 12 / 119

培训手册
Training Manual
安全规则
Safety Regulation
JCPT-HD/DC
www.cndingli.com
1-8
Do not alter or disable machine components that in any way affect safety and stability.
Do not replace items critical to machine stability with items of different weight or specification.
Do not use batteries that weigh less than the original equipment. Batteries are used as
counterweight and are critical to machine stability. Each battery must weigh 26 kg. The batteries
must weigh a minimum of 104 kg. (For JCPT0807HD/DC); Each battery must weigh 37 kg. The
batteries must weigh a minimum of 74 kg. (For JCPT0807G DC); Each battery must weigh 28 kg.
The batteries must weigh a minimum of 112 kg. (For JCPT0808HD/DC, JCPT1008HD/DC,
JCPT1012HD/DC); Each battery must weigh 30 kg. The batteries must weigh a minimum of 120
kg (For JCPT1212HD/DC); Each battery must weigh 37 kg. The batteries must weigh a minimum
of 148 kg (For JCPT1412HD/DC, JCPT1612HD/DC).
Do not modify or alter an aerial work platform without prior written permission from the
manufacturer. Mounting attachments for holding tools or other materials onto the platform, toe
boards or guard rail system can increase the weight in the platform and the surface area of the
platform or the load.
Do not place ladders or scaffolds in the platform or against any part of this machine.
Do not transport tools and materials unless they are evenly distributed and can be safely handled
by person(s) in the platform.
Do not use the machine on a moving or mobile surface or vehicle.
Be sure all tires are in good condition, air-filled tires are properly inflated and lug nuts are properly
tightened.
砸压危险（
Crushing Hazard
）
不要将手和胳膊靠近有剪伤、砸压危险的部位。
当折叠栏杆时，手不要放在可能被夹伤的地方。
拔下护栏锁定销时始终抓紧护栏，防止平台护栏倒下。
当在地面上使用控制器操作机器时，请保持正常判断力并具有计划性。在操作员、机器和固定物体
之间保持安全距离。
Keep hands and limbs out of scissors.
Keep hands clear when folding rails.
Use common sense and planning when operating the machine with the controller from the ground.
Maintain safe distances between the operator, the machine and fixed objects.
Maintain a firm grasp on the platform rail when removing the rail pins. Do not allow the platform
guard rails to fall.