DL JCPT-HD/DC Series, Training Manual, Page: 52 / 119

培训手册
Training Manual
参数调整
Parameter Adjustment
JCPT-HD/DC
www.cndingli.com
5-2
1.
速度调节状态（
Speed Adjust State
）
图示
(Graphic)
说明
(Instruction)
按住起升和喇叭按钮，拔出
PCU
上的急停按钮以进入
速度调节状态。
Press and hold HORN and LIFT buttons while pulling
the PCU’s E-Stop (out) to enter Speed Adjust State.
“PS”
和当前起升速度会交替在屏幕上闪烁。松开起升
和喇叭按钮。
“PS” and current Lift Speed are alternately flashing on
the display. Release LIFT and HORN buttons.
1.1
行走高速（收拢状态）（
Drive High Speed with Platform Stowed
）
图示
(Graphic)
说明
(Instruction)
按下行走按钮。按钮上的
LED
显示该模式被激活。可以
用右转（增加）和左转（减少）按钮来调节速度。
Press DRIVE button.The DRIVE LED indicates this
mode is active.Adjust the speed using the RIGHT
TURN (increase) or LEFT TURN (Decrease) button on
the top of the Joystick.
该值可以使用手柄上顶部的按钮调节从
00
到
100
（显示
9˙9
）
The value can be changed from 00 to 100
(displays 9˙9) with the buttons on top of the Joystick.